Overview of Compliance Standards for Walk in High and Low Temperature Damp Heat Test Chamber
Time：2024-09-12
The walk-in high and low temperature wet heat test chamber is an experimental equipment used to simulate and evaluate the performance and reliability of products in high temperature, low temperature, and wet heat environments. This type of test chamber usually has sufficient space for testers to enter and operate and monitor.
The walk-in high and low temperature wet heat test chamber usually has the following main features and functions:
Wide temperature range: The test chamber can provide a temperature range from extremely low to high to meet the testing needs of different products. The common temperature range is usually -70 degrees Celsius to+150 degrees Celsius, or even higher or lower.
Humidity control: The test chamber can control the humidity in the air and simulate environments under different humidity conditions. Humidity regulation and control can usually be achieved through humidifiers or dehumidifiers.
Stability and accuracy: The test chamber has a good temperature and humidity control system, which can maintain stable environmental conditions and provide high-precision temperature and humidity control.
Meet the standards
GB 10589-2008 Technical Conditions for Low Temperature Test Chambers
GB 11158-2008 Technical Conditions for High Temperature Test Chambers
GB 10592-2008 Technical Conditions for High and Low Temperature Test Chambers
GB2423.1-2008 Basic Test Procedures for Electrical and Electronic Products - Test A: Low Temperature Test Method
GB2423.2-2008 Basic Test Procedures for Electrical and Electronic Products - Test B: High Temperature Test Method
GB2423.4-2008 Basic Test Procedures for Electrical and Electronic Products - Test Db: Alternating Current Test Method
GB2424.1-2005 Basic Environmental Testing Procedures for Electrical and Electronic Products - Guidelines for High Temperature and Low Temperature Testing
GB2423.22-2008 Basic Test Procedures for Electrical and Electronic Products - Test N: Temperature Change Test Method
GB/T5170.2-2008 "Basic parameter calibration methods for environmental testing equipment for electrical and electronic products - Temperature testing equipment"
GB2423.3-2008 Test C "Constant Damp Heat Test Method";
GB2423.4-93 Test D "Alternating Damp Heat Test Method"
The walk-in high and low temperature wet heat test chamber is mainly used for quality control and reliability evaluation of various industrial products such as electronic products, automotive components, aerospace equipment, instruments and meters, plastics, rubber, etc. By conducting long-term testing under different temperature and humidity conditions, the product's tolerance and performance stability in adverse environments can be tested, providing reference for product design and improvement.
News
Product structure of environmental simulation experimental equipment
The product structure of environmental simulation experimental equipment usually includes multiple key parts to ensure the ability to simulate various complex environmental conditions. The design of these devices aims to simulate natural climate environments, including but not limited to various factors such as temperature, humidity, air pressure, vibration, etc., to test the performance of materials and products.
2024-09-12
Guangzhou HIYM Intelligent Instrument Co., Ltd
Guangzhou HIYM Intelligent Instrument Co., Ltd. was established in 2016. It is a national high-tech enterprise specializing in the research and development, design, production, sales, and after-sales service of environmental simulation experimental equipment. It is a specialized and innovative enterprise.
2024-09-12
Can the temperature change rate of the environmental laboratory meet the requirements?
The environmental laboratory has been upgraded on the basis of the original walk-in laboratory, with the characteristics of large testing space and operators being able to operate the test samples in the laboratory, providing conditions for temperature and humidity environmental testing of bulk or large parts, semi-finished products, and finished products for industrial manufacturers.
2024-09-12
Contact Us
86+
E-Mail：gzwld@gzwld.com
Address: Building 7, No. 7 Dongsheng Road, Xinya Street, Huadu District, Guangzhou City
We can contact with each other in wechat
Follow official account
Add WeChat
Copyright © 2024 Guangzhou HIYM Intelligent Instrument Co., Ltd
Copyright © 2024 广州亚玛智能仪器有限公司